Wall‑Mounted Multi‑Grip Chin‑Up Rack Upper‑Body Pull‑Up Training Station LCR‑1102

Product Features And Advantages：

LCR-1102 wall-mounted chin-up rack is wall-fixed equipment for upper-body strength training. The full unit consists of left-and-right wall-mount support brackets and a multi-grip chin-up bar, secured onto solid walls via expansion bolts. Multiple grip positions on the bar enable wide-grip, close-grip and neutral-grip pull-ups as well as hanging leg raises. It targets back, biceps, arm and core muscle groups. Compact and floor-space-free, it serves as a practical training accessory for both home and commercial fitness venues.

Product Characteristics：

1.Heavy–Duty Square–Tube Steel Frame: Main 50×50×2 mm square steel tube, fully welded construction with electrostatic powder-coated finish for excellent rust-proof and scratch-resistant properties and rigid frame performance.

2.Multi–Grip Bar Design: Multiple grip distances support wide-grip, close-grip and neutral-grip training modes to diversify workout options.

3.Triangular Reinforced Supports: Triangular diagonal braces on both side brackets distribute stress to improve torsion-resistance and overall load-bearing capacity.

4.Space–Saving Wall–Mount Design: Fastens directly to wall without floor base, conserving training-area floor space.

5.OEM Customization Available: Custom powder-coat colours for brackets and bars. Screen-printed or laser-engraved brand logos are supported for bulk-order B-end customers.

Product Parameters：

Notes: Install only on solid concrete or brick load-bearing walls. Never mount onto hollow or plasterboard walls. Inspect all expansion bolts and connecting fasteners for tightness before every workout.

Features & Specs：

Applicable Training Scenarios  

✅ Supported movements: wide-grip pull-ups, close-grip pull-ups, neutral-grip pull-ups, hanging leg raises, suspension stretching

✅ Suitable venues: home fitness spaces, commercial gyms, personal-training studios

✅ Suitable users: fitness enthusiasts undertaking upper-body strength training

⚠️ Reminder: Mount only onto solid load-bearing walls. Do not install on hollow or plasterboard walls. Verify all fasteners are locked before exercise.

Usage Instructions

1.Fit left-and-right brackets flat against solid load-bearing wall. Tighten all mounting holes with appropriately-sized expansion bolts.

2.Join multi-grip chin-up bar to side brackets and fasten connecting bolts; confirm zero play at all joints.

3.Grasp corresponding grip positions to perform pull-ups, hanging leg raises and other controlled movements. Avoid violent heavy impacts against the equipment.

4.Periodically inspect wall expansion bolts and connection hardware; retighten loose fasteners promptly.

⚠️ Safety Notes: Installation is permitted exclusively for solid concrete or brick walls. Hollow walls, lightweight partition walls and plasterboard cannot support this rack. Only one user at a time; simultaneous multi-person hanging is strictly prohibited. Discontinue use if any fasteners become loose.

Frequently Asked Questions：

I.Selection

Q: Can this chin-up rack be installed at home?

A: Only for solid concrete or solid brick load-bearing walls. Hollow walls and plasterboard are unsuitable. Confirm wall load-bearing capacity prior to purchase.

II.Material

Q: What grade of steel is the unit made from?

A: Constructed from 50×50×2 mm square steel tube with electrostatic powder-coating after welding for rust-proof and scratch-resistant performance.

III. Specification

Q: How is the product packaged?

A: One set is split into two separate cartons. 280 sets can fit into one 20-ft shipping container.

IV. Usage

Q: What maximum weight can it bear?

A: Safe performance depends entirely on secure wall and expansion-bolt installation. Intended for single-person use only. Always inspect fasteners before every session.

V.Customization

Q: Can I customise colours and brand logos?

A: Custom frame-coating colours and screen-printed / laser-engraved logos are available subject to minimum-order-quantity (MOQ).

VI.Sample

Q: Can I order product samples?

A: Samples are available with 7-15 working-day lead-time. Bulk-order production takes 40-45 working days.

VII. Packaging

Q: What form of transport packaging is supplied?

A: One complete set split into two independent cartons, optimised for sea-container shipment.

VIII. Maintenance & Care

Q: How should I maintain the wall-mounted chin-up rack?

A: Periodically check all bolts and expansion fasteners. Wipe steel surfaces with dry cloth and avoid persistently damp environments to prevent rusting.

Need help choosing the right products for your market or gym project? Contact PROESCE for product specifications, sample options and a customized quotation.